Livingston Reporting - page 14

Successful Tips for November Deer Hunting

For hunters, November is an exciting and favored month. It’s a pivotal time for deer hunters, marked by the peak rutting (breading) season and the unique behavioral patterns of deer. It’s also the period for open deer hunting on public and private lands for archery and firearms in most local areas. We provide insights and strategies for successful deer hunting, gathered from various experienced hunters and experts.

Week-by-Week Breakdown of November Deer Hunting

November 1-6:

Pre-Rut Behavior: Bucks are in the pre-rut stage, actively rubbing and scraping, and beginning to search for does, though the does are not yet receptive.

Hunting Strategies: Focus on areas near scrapes and use calling tactics. Ideal locations include staging areas, near buck or doe bedding areas, saddles, pinch-points, and funnels. Treestand hunting is highly effective during this period​​.

November 7-13:

Lock-Down Phase: Some does enter estrus, leading to a lock-down phase where bucks stay close to a doe. This can make hunting challenging as bucks tend to be less mobile.

Hunting Approach: Continue using tactics from the end of the first week. Position yourself near a thick brush or other dense cover where bucks might pursue does​​.

November 14-20:

Post Lock-Down Phase: The lock-down phase generally ends, and deer movement increases again.

Tactics: Adopt the same strategies as in the first week, with added caution due to increased hunting pressure. Consider hunting near leeward ridges, trail intersections, and pockets of cover​​.

November 21-30:

Late Rut Activity: Bucks revert to seeking and chasing behaviors, and big bucks are more active. Younger bucks might show decreased activity due to fatigue.

Strategy: Hunt as in the first two weeks but consider moving deeper into cover to adapt to hunting pressure and changing deer patterns. Be ready to switch to late-season tactics if rut activity decreases​​.

Additional Hunting Strategies and Tips

  1. Hunting Thicker Cover: During the lock-down phase, focus on heavier cover areas, often referred to as “heat cover,” where does in heat might isolate themselves. This can attract bucks checking on prospective mates​​.
  • Choosing Hunting Days: Utilize tools like Drury’s DeerCast to select the best days for hunting based on game camera activity and rut predictions. Consider hunting throughout the day, especially midday, as this period can be surprisingly active​​.
  • Rub Lines: Locate rub lines to find areas where mature bucks are active. Trail cameras can be strategically placed along these lines to monitor deer movement and identify potential targets​​.
  • Run-and-Gun Method: This tactic involves moving hunting locations frequently, especially on public land where deer are wary of human presence. It’s effective for adapting to deer movement patterns and avoiding over-pressuring a specific area​​.
  • Mock Scrapes: Creating mock scrapes can be an effective tactic to attract bucks, particularly when enhanced with the right scents and placed strategically near your stand​​.
  • Scent Control: Rigorous scent control is crucial for hunting mature whitetails. This includes using scent elimination products, managing what you eat before the hunt, and understanding wind direction to stay downwind of your target​​.

Successful November deer hunting requires an understanding of deer behavior during the rut, strategic placement of stands and blinds, the use of trail cameras and rub lines for scouting, adaptability in hunting tactics, and meticulous scent control. With patience, observation, and the right approach, November can be an extremely rewarding time for deer hunters.

____________

Wolf Survival Gear is a hub for your prepping and survival needs. We are your trusted resource for concerned families, avid hunters, or serious preppers. Make us your one-stop-shop and prepare now, before you need it later.

Written by the digital marketing team at Creative Programs & Systems: www.cpsmi.com

Unwanted Guests: Bed Bug Inspection & Discreet Extermination

When it comes to pests invading your space, few are as unsettling and persistent as bed bugs. These tiny, bloodsucking insects can infest homes and commercial properties, causing discomfort, stress, health concerns, and even loss of income. If you suspect a bed bug infestation in your Colorado property, it is crucial to address it promptly. This article explains how we at Front Range Pest assess and eradicate these insects discretely and effectively.

Identifying the Signs of a Bed Bug Infestation

Bed bugs are notoriously skilled at hiding, but they do leave behind some telltale signs. Here’s what to look for when inspecting your property:

  • Bite Marks: Itchy, red, and often clustered bite marks on your skin, particularly in a linear pattern, can be a strong indicator of bed bug presence.
  • Tiny Rust-Colored Stains: Bed bugs often leave behind small bloodstains on sheets and mattresses, a result of their feeding habits.
  • Exoskeletons and Eggs: Check the seams and crevices of your mattress, furniture, and walls for discarded exoskeletons and tiny, pearly-white eggs.
  • Musty Odor: Bed bugs emit a distinctive, sweet, and musty odor. If you detect this scent, it’s a sign of a substantial infestation.

Why Choose Front Range Pest for Bed Bug Problems

Front Range Pest is your trusted partner in discreetly exterminating bed bugs. Here’s why you should consider their services:

  • Expertise: Our technicians are highly trained in bed bug identification and removal, ensuring thorough and effective extermination.
  • Discretion: We understand the sensitive nature of bed bug issues, and we prioritize prudence,   attempting to avoid drawing attention to your property.
  • Safe and Effective Treatments: We employ safe, environmentally friendly treatments to eliminate bed bugs without harming your family, pets, or the environment.
  • Follow-Up Inspections: After treatment, our techs will conduct follow-up inspections to ensure all bed bugs are eradicated, giving you peace of mind.

Our Bed Bug Extermination Process

Front Range Pest follows a comprehensive approach to exterminating bed bugs:

  • Assessment: We assess the extent of the infestation to determine the most appropriate treatment plan.
  • Treatment: We employ a combination of heat treatments, chemical treatments, and specialized equipment to eliminate bed bugs at all stages of their life cycle.
  • Prevention: We provide recommendations to prevent future infestations, including tips for maintaining a bed bug-free environment.

Bed bugs can quickly turn your home or commercial property into an uncomfortable and stressful space. When dealing with a bed bug infestation, acting quickly to remove them is essential. The experts at Front Range Pest can help you identify and eliminate bed bugs, ensuring your peace of mind and the safety of your loved ones or customers.

Don’t let bed bugs take over – contact Front Range Pest to regain control of your space today!

___________

Front Range Pest is your trusted, family-owned pest and wildlife control company serving central Colorado and southern Wyoming. Our certified technicians have the expertise and credentials to ensure effective pest management for your home or business. As your all-in-one insect and wildlife specialists, we offer peace of mind by identifying wildlife entry points, removing nuisance pests, sealing access areas, performing cleanup, and making essential repairs. Schedule an inspection with us today.

Written by the digital marketing team at Creative Programs & Systems: www.cpsmi.com

Construction Industry Tops Ransomware Risk, Says Encryption Software Study

Nordlocker, an encryption software firm, conducted research in 2021 and found that the construction industry faced the highest risk of ransomware attacks among 35 analyzed industries. This risk has increased since then, with Nordlocker reporting in 2023 that the construction sector experienced the most ransomware attacks from January 2022 to January 2023.

The construction industry’s growing reliance on digital technology, particularly computer-aided design (CAD), building information modeling (BIM), and cloud-based collaboration tools, has made it a vulnerable target for cyberattacks. Many organizations in this sector lack adequate cybersecurity plans and have poorly trained employees in identifying and responding to cyber threats.

Ransomware, a malicious attack where data is encrypted and a ransom is demanded for access restoration, poses a significant threat. Paying the ransom doesn’t guarantee data recovery, and the average cost of a ransomware breach is around $4.44 million, damaging a company’s reputation.

Fraudulent wire transfers, phishing scams using social engineering, and compromised emails are prevalent in the construction industry. Cybercriminals impersonate authoritative figures to manipulate financial transactions.

The construction sector is also at risk of intellectual property and data theft, which can lead to significant reputational damage. Protecting sensitive information, such as SSNs, credit card data, and proprietary designs and patents, is crucial to mitigating these cyber threats.

Six Essential Steps to Strengthen Your Construction Service’s Cybersecurity

Privileged Access Management:

Continuously monitor and assess access rights to safeguard your information.

Data Governance and Security:

Categorize data by sensitivity and prioritize the protection of critical data assets.

Regular Secure Backups:

Mitigate potential data and system loss in the event of cyberattacks.

Team Member Education:

Ensure your team is well-informed about industry-specific cyber risks and can recognize and report social engineering attempts.

Enforce Cybersecurity Standards in Contracts:

Reduce third-party risks by requiring external partners to adhere to robust cybersecurity practices.

Implement an Incident Response Plan:

Define immediate actions and strategies to minimize potential losses in the event of a cyberattack.

Boost your cybersecurity defenses today; we’re here to help address your inquiries.  

_________

At Construction Bonding Specialists, we work with new and experienced contractors to find the most satisfactory bond solutions. As a dedicated surety-bond-only agency with decades of bonding experience, we strive to discover surety solutions for all types of cases, ranging from routine to challenging. Contact us online or call us at 248-349-6227 to learn more.

Written by the digital marketing team at Creative Programs & Systems: www.cpsmi.com

We’re So Thankful for You!

There are countless reasons for us to feel gratitude, and you, our esteemed customer, are certainly one of them! We at J&P Electrical immensely appreciate the incredible loyalty and support we receive from our valued clientele.

Here are just a few who have reached out to let us know how we have helped:

“I must have called 10 places to find a part. J&P not only had the best price by far, but they shipped it the same day. I save time now and call them FIRST.”  – Purchasing Manager, NC

“Went down and met Doug at JP Electrical and was more than impressed with their operation.   Wish I knew about this place years ago. I am confident that the gear he showed me will be more than adequate.”  – Wayne, United Electrical

“You folks are a first-class family! We totally appreciate everything you’ve done for us.”  – Michael, NAS

“Customer called me this morning praising the duct and plugs that you sent. They could not get over the quality of the recon as well as the packaging. They are thrilled. I know you just did what you always do, your best! Thank you!!”  – Scott K.

“Just wanted to pass along a compliment that was sent to me about a recent order that we had shipped direct from J&P Electrical Company. A new client of ours called in to tell me how impressed he was when he received the bus plugs that were ordered. He was a bit apprehensive working with a new vendor and bit unsure of what to expect with a direct shipment but was VERY happy when he received his bus plug order, and they looked like new. Thanks again, J&P!” – Brian, Lancaster

“Been a customer since 2014. Great quality on refurb products and a very knowledgeable staff.  J&P does an outstanding job, I would highly recommend them!” – Jeremy K.

Again, thank you for your kind words and helping our business grow. It’s through word of mouth and public expressions of satisfaction that amplifies our presence and helps share the standard of excellence we strive to deliver. Our wish is that we have added, at least in some small measure, to the flourishing of your business ventures.

We would also like to extend a heartfelt thanks to our J&P Electrical team for your unwavering commitment. Your efforts enable us to serve many. We wish you all a joyful holiday with family and friends!

Live in Peace, With Joy and Thankfulness

Happy Thanksgiving!

­__________

J&P Electrical is a full-service electrical supply company. At J&P, we source contractors, end-users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We also purchase a wide range of heavy industrial electrical equipment such as bus plugs, bus duct, transformers, circuit breakers, fuses, and switchboards. Call us at 877-844-5514 for assistance.  

Written by the digital marketing team at Creative Programs & Systems: www.cpsmi.com

The Hidden Gem: Private Wells Supplying Homes in Michigan

When considering clean and reliable water resources in Michigan, most people first think of the Great Lakes. However, there’s an overlooked water source that has provided countless residents for generations: private wells. An extensive network of private wells dots the landscape, supplying water to rural and suburban homes. These private wells offer homeowners a degree of autonomy and control over their water supply, as they are not connected to municipal water systems.

The Significance of Private Water Wells

Self-Sufficiency:

Private wells empower homeowners to have their own water source, reducing dependence on municipal water supplies and potentially saving on water bills.

Water Quality:

Many private well owners attest to the superior taste and quality of well water, which often comes from underground aquifers free from the chlorine and additives present in treated city water.

Environmental Impact:

By relying on their wells, homeowners can help reduce the strain on municipal water treatment facilities and decrease their ecological footprint.

Things to Consider Regarding Private Water Wells

Water Quality Testing:

Regular testing for contaminants like bacteria, nitrates, and arsenic is crucial to ensure the safety of well water. Michigan residents should take advantage of the state’s free well water testing program to assess water quality.

Maintenance:

Private well owners need to invest in regular well maintenance to ensure their systems operate efficiently and reliably. This includes checking pumps, pressure tanks, and well casings.

Regulations:

Michigan has specific regulations governing private wells, and homeowners must comply with these guidelines to ensure their wells meet safety standards.

Vulnerability to Contaminants:

Private wells are vulnerable to contamination from various sources, including nearby septic systems, agricultural runoff, and industrial pollutants. Ensuring proper well construction and maintenance is essential to minimize these risks.

Protecting Michigan’s Well Water

  1. Test your water regularly and follow recommendations for water treatment or filtration if necessary.
  2. Work with licensed contractors for installation, repair, and maintenance.
  3. Be aware of potential sources of contamination in the vicinity of the well.
  4. Stay informed about state regulations related to private wells.

Private wells supplying homes in Michigan are vital in providing clean and reliable water to residents across the state. While they offer numerous benefits, homeowners must also be diligent in ensuring the safety and quality of their well water. By taking proactive steps and adhering to state regulations, Michigan residents can continue to enjoy the advantages of private well ownership while protecting their health and the environment for future generations.

If you have well water, contact the experts at Reynold’s Water for testing and solutions for treating water and more!

Reynolds Water Conditioning was established in 1931 and is Michigan’s oldest water conditioning treatment company. Still owned and operated by the Reynolds family, we take pride in providing the highest quality products at a cost-effective price. If your tap water lacks the quality you deserve, contact us today at 800-572-9575.

Written by the digital marketing team at Creative Programs & Systems: www.cpsmi.com

Flooring: Ceramic Tile, Laminate, and Hardwood Installation

When it comes to sprucing up your home, few things have as immediate an impact as new flooring. Whether you’re renovating an old space or putting the finishing touches on a new one, the flooring you choose is crucial in setting the tone and style of a room. Among the myriad of options available, ceramic tile, laminate, and hardwood stand out as popular and timeless choices. Each of these flooring types has its own set of benefits and a unique installation process. This guide delves into what makes these materials tick and how they can transform your space.

Ceramic Tile: Elegance Meets Durability

Ceramic tile flooring is renowned for its durability and ease of maintenance. It’s a perfect fit for areas with a lot of foot traffic or that are prone to moisture, like bathrooms and kitchens. Tiles come in an astonishing variety of colors, patterns, and sizes, allowing for a high degree of customization.

Installing Ceramic Tile Flooring

  • Preparation: The subfloor needs to be clean, level, and firm. Any old flooring should be removed, and the subfloor may need to be repaired or replaced if it’s not in good condition.
  • Layout: Tiles are laid out to finalize the pattern and to plan for any cuts that need to be made.
  • Adhesive: A special tile adhesive or thin-set mortar is applied.
  • Setting Tiles: Tiles are set carefully into place, with spacers used to ensure even gaps for grout.
  • Grouting: Once the adhesive is set, grout is applied to fill the spaces between the tiles.
  • Sealing: Depending on the type of tile and grout, a sealant may be applied for extra protection.
  • Ceramic tile requires skill to install, so hiring a professional is recommended.

Laminate: Versatility and Ease

Laminate flooring is a fantastic option for those who love the look of hardwood but are on a budget. It’s also incredibly user-friendly, making it a popular choice for DIY enthusiasts. Laminate comprises several layers of synthetic flooring products fused through lamination, often with a photographic applique layer under a clear protective coating.

Installing Laminate Flooring

  • Preparation: The subfloor needs to be flat, clean, and dry. An underlayment is usually laid down first for noise reduction and insulation.
  • Planks: Laminate planks are designed to interlock, making installation relatively straightforward.
  • Cutting: Planks must be cut to fit the room’s dimensions.
  • Expansion Gap: It’s vital to leave a small expansion gap around the room’s perimeter to accommodate swelling with changes in humidity.
  • Finishing Touches: Baseboards and thresholds are installed after the laminate is laid down.
  • Laminate flooring may be easier to install for some; however, it’s not for everyone. Determine what’s doable for you or call a pro!

Hardwood: Timeless and Traditional

Nothing beats the classic beauty and warmth of hardwood floors. Hardwood can add value to your home and is available in various species, stains, and finishes. While hardwood flooring can be more of an investment, its durability and timeless appeal make it a smart long-term choice.

Installing Hardwood Flooring

  • Preparation: Like other flooring, the subfloor must be level, clean, and dry.
  • Acclimation: Hardwood planks need to acclimate to the room’s humidity for several days to prevent warping.
  • Installation: Each plank is nailed or stapled through a tongue-and-groove system.
  • Sanding and Finishing: Unfinished hardwood will require sanding and finishing, a process that seals and protects the floor.
  • Trimming: Baseboards, shoe moldings, and thresholds are added.
  • Hardwood floor installation can be complex and is generally best left to professional installers to ensure a lasting and beautiful result.

Your choice of flooring can dramatically change the look and feel of a room. Whether you opt for the elegance of ceramic tile, the practicality of laminate, or the timeless beauty of hardwood, ensure that the installation process is handled with care to enjoy a floor that looks great and performs well over time. Remember that while DIY is an option for some types of flooring, professional installation can guarantee a job well done, saving you time and potential headaches down the line. Choose wisely, and your floors will be a point of pride in your home for years to come.

Planning to upgrade your flooring? Contact JFC Remodeling professionals for superior flooring installation. 

____________

JFC Remodeling is committed to providing top-quality home reconstruction services to clients throughout Livingston County. With over 30 years of experience in the industry, our licensed contractors create unique, individualized, and polished renovations. Whether the site requires an improvement, repair, or is a new construction, you can trust our experts to deliver remarkable results. Call or email us to learn more.

Written by the digital marketing team at Creative Programs & Systems: www.cpsmi.com

The Importance of Regular Electrical Inspections to Ensure Home Safety

Your home’s electrical system is akin to the nervous system of the human body—it’s hidden, complex, and essential for the day-to-day operations of your home. However, its hidden nature means potential problems can go unnoticed until they manifest as serious safety risks. This is where the importance of regular electrical inspections comes into play.

Why Are Electrical Inspections So Crucial?

Preventing Electrical Fires: This is pretty obvious, but it’s important to note. According to the National Fire Protection Association (NFPA), electrical failures or malfunctions are the leading causes of home structural fires. A professional inspection can identify faulty wiring, overloaded circuits, and outdated electrical panels before they become hazards.

Ensuring Safety and Compliance: Over time, electrical installations can deteriorate. An inspection helps ensure that your home’s electrical system complies with the strict standards set by the National Electrical Code (NEC), which is updated every three years to reflect the latest safety practices.

Enhancing Energy Efficiency: An electrical inspection can help identify ways to improve your home’s energy efficiency. Electricians can recommend modern, energy-saving solutions like LED lighting or upgraded appliances that lower energy consumption and reduce utility bills.

Maintaining Insurance Standards: Many home insurance policies require that your home’s electrical system is up to certain standards. Regular inspections can provide the documentation needed to satisfy insurance companies.

What Does an Electrical Inspection Entail?

A thorough electrical inspection conducted by the licensed professionals at State Electric Company includes the following:

  • Assessment of Electrical Panels: proper operation, signs of wear, secure connections with no rust or corrosion, and compliance with current regulations
  • Evaluating Outlets and Switches: properly functioning, safe wiring, any signs of overheating, etc.
  • Testing Safety Devices: This includes verifying that GFCIs (Ground Fault Circuit Interrupters) and AFCIs (Arc Fault Circuit Interrupters) are functioning correctly to protect against electric shock and electrical fires.
  • Check all visible wiring in the customer’s home.
  • Test all smoke detectors and carbon monoxide detectors.
  • Look for any shock or electrocution hazards.
  • Verify that all breakers are in good working order and identify corrosion and loose connections.
  • Inspect all high voltage receptacles (i.e., 240V appliances, water heater, EV charger, etc.)
  • Confirm and assess the grounding systems.
  • Inspection of the electrical meter and riser conduit.
  • Ensure that the placement of smoke detectors is up to code.
  • Diagnosis of any customer-known electrical issues.

When Should You Get an Electrical Inspection?

Upon Purchasing a Home: Before finalizing a home purchase, have the electrical system inspected to avoid any unforeseen and costly problems.

When a Home is 25+ Years Old: If you live in an older home that hasn’t been inspected in a while, it’s prudent to assess the electrical system thoroughly. 

After a Major Renovation: Any time significant renovations or additions are made, an electrical inspection should be part of the process to ensure the new wiring meets code.

If You Notice Warning Signs: Flickering lights, buzzing sounds, tripping breakers, or any unusual electrical system behavior, it should be followed up with an inspection ASAP!

Regular electrical inspections are not just about compliance or efficiency; they are a proactive measure to ensure the safety and well-being of your family. They serve as a preemptive strike against potential dangers lurking behind your walls. So, whether it’s time for your routine check-up or if you’re noticing some electrical quirks, don’t hesitate to call a professional electrician. Your home, and more importantly, your safety, depend on it!

Be sure to check with your local government for current regulations and standards. Also, only hire a qualified, licensed electrical contractor, such as State Electric Company, for your inspection needs. Schedule an electrical inspection today!

__________

State Electric Company is a leader in the electrification of the nation. Our highly educated and experienced team of professionals uses industry-leading software technology and has partnered with manufacturers to deliver affordable solutions for all your electrical needs. State Electric Co. is also an exclusive distributor of Enel X JuiceBox EV chargers for residential and commercial use. We are fully licensed, insured, and bonded to install charging stations for homes, offices, hotels, and more. With our extensive knowledge of renewable energy, our team provides customers – large or small – with efficient electrical solutions. Contact us today to learn how we can safely and affordably meet your energy needs. 

Written by the digital marketing team at Creative Programs & Systems: https://www.cpsmi.com/

Patients Privately Pay $2,500 for a Full-Body MRI Scan to Detect Cancer

Dr. Julianne Santarosa, celebrating July Fourth on a boat in Texas, received unsettling news during a full-body MRI scan conducted by Prenuvo. Radiologists had identified a lung nodule, raising concerns about her health. Although she hadn’t experienced any pain or specific symptoms, she had a gut feeling to get the scan after seeing a Prenuvo ad on Facebook. Subsequent tests confirmed the nodule was cancerous, but the early detection allowed for prompt treatment and a more favorable outcome.

Demand for Prenuvo’s services has surged, prompting the company to announce the opening of 11 new locations by 2024. Celebrities like Kim Kardashian have endorsed the company, and notable investors include Cindy Crawford, Eric Schmidt, Anne Wojcicki, and Tony Fadell. Prenuvo utilizes custom MRI machines capable of scanning the entire body in about an hour, providing comprehensive health assessments. However, the service is currently not covered by insurance, necessitating out-of-pocket payments.

Prenuvo’s mission is to empower customers by revealing more than 500 conditions, including cancer, multiple sclerosis, and brain aneurysms, through advanced imaging technology. Despite long waitlists, many individuals are eager to experience the benefits of early disease detection. While Prenuvo aims to lower costs through various means, radiologist shortages and the limitations of MRI scans underscore the complexities of healthcare diagnostics.

Prenuvo’s technology offers peace of mind and relaxation during the scanning process. Patients receive results within a few weeks and appreciate the non-invasive and comfortable experience. As the company continues to evolve, it strives to complement existing healthcare practices, emphasizing that its scans are not meant to replace targeted screenings like colonoscopies and mammograms.

While the journey to revolutionize medical diagnostics is ongoing, Prenuvo’s innovative approach has garnered attention and sparked patient and investor interest. Its commitment to early detection and enhancing overall wellness suggests a promising future for this pioneering healthcare company.

__________

RadParts, a TTG Imaging Solutions Company, is the world’s largest independent distributor of OEM replacement parts. We specialize in low-cost parts for repairing linear accelerators and radiation equipment. Our mission is to provide high-quality, user-friendly, low-cost components and support for linear accelerators and radiation equipment. Contact RadParts at 877-704-3838 to learn more.

Written by the digital marketing team at Creative Programs & Systems: www.cpsmi.com

What is a Gunite Pool?

Image of the Pound Pool Plastering team applying gunite to a pool.

While sitting poolside, you’re likely not considering what the pool is made of but rather just soaking in the rays and enjoying a cool beverage. However, if you’re in the market for a pool or need an upgrade to your existing structure, then this article might pique your interest. Read on to learn more about gunite, the strongest, most durable material used for inground pools.

What is Gunite?

Inground pools can be made from three different materials: vinyl liners, fiberglass, or concrete (aka gunite or sprayed concrete.) Gunite is the process of applying dry cement, blowing through a hose, and mixing it with water as it’s sprayed. Reinforced with steel mesh, the material is sticky and holds place once applied. It can be sprayed onto any type or shape of surface, including vertical or overhead areas.

It’s amazing how the original, gooey, and messy application process transforms into a beautiful, functional swimming pool. Although concrete isn’t easy to work with, it’s a proven winner for durability. Ancient Roman architecture is a prime example of the superiority of this dense industrial material that quickly dries while retaining its shape. Concrete-like mixtures have been used as a building material since roughly 6,500 BC.

What is Gunite Made From?

Concrete is generally made from a combination of cement, sand, and some type of aggregate, such as small pieces of hard material like crushed stone or gravel, all mixed with water. Sometimes, it’s made of lime or silicate powder.

China is the largest producer of cement. Cement is the most widely used manufactured material globally and is second only to water as the most widely used substance worldwide. Gunite for pools has highly compressed strength, which makes it impermeable to water and frost resistance.

History of the Gunite Pool

Concrete pools, which date back to the era of Roman baths, were transformed in the 1940s with the introduction of gunite construction. With newly returning WWII veterans, families sought comfortable places of refuge in their suburban homes. Gunite is a technique that revolutionized pool construction, enabling builders to craft appealing, customized pools with greater ease.

Craftsmen and builders no longer depend on heavy, removable molds or forms to create shaped concrete. The invention of gunite prevents the need for extensive heavy machinery and intensive labor to create casts or templates that shape poured concrete until it sets. Gunite simplifies the creation of unique swimming pools.

Considering a new pool or replastering? Contact Pound Pool Plastering today for a free estimate and get booked in our spring schedule!

__________

Pound Pool Plastering services residential and commercial pools in applying a wide variety of pool plaster finishes and complete renovations. We offer Diamond Brite, Sunstone, Hydrazzo, and Marcite – and a great selection of tile choices and coping stones. Owner Dale Pound personally oversees each pool project to ensure the highest quality is delivered. Call or email us for a free estimate.

Written by the digital marketing team at Creative Programs & Systems: www.cpsmi.com

Colorado’s October Pests: Ants

Close up image of two ants to represent the common challenges posed by ants in Colorado.

As the autumn leaves begin to paint Colorado’s landscape with hues of gold and red, it’s not just the scenery that changes. October also brings a shift in the world of pests, with ants becoming more prominent visitors in our homes. We explore the common challenges posed by ants in Colorado and offer tips on how to manage them effectively.

Problematic Ants on the Move

Colorado’s cool October weather often sends ants marching into homes in search of warmth and sustenance. Common culprits include pavement ants, carpenter ants, sugar ants, and field ants. These tiny invaders can quickly become a nuisance as they forage for food, particularly sweets and proteins, in your kitchen and pantry. Carpenter ants are in search of moist wood to build their nest site, not eat as some may think. They use their strong jaws to excavate and tunnel through soft wood, leaving dust piles in their track.

Ants are social insects, meaning they work closely together with other ants of their species to live and work. So, when you see one ant, there are always more! Each ant colony consists of three groups: the queen and male breeders, soldiers, and workers. The first group keeps the colony going; the soldiers protect the queen and the nest, and the workers do everything else. Worker ants are responsible for finding food to supply the nest, making them a considerable inconvenience if they invade your residence or workplace. Worker carpenter ants also forage for food and seek suitable places to live, such as damp floor joists or attic trusses.

If left unchecked, the population of an ant colony can rapidly increase in size, making the removal process much more tedious. Although carpenter ant nests tend to have a smaller population than other species, they expand more gradually. However, if left unattended over time, carpenter ants can seriously damage the integrity of your home structure. No matter the type, it’s best to contact a pest control company ASAP when an ant invasion has been spotted.

Naturally Managing Ants

Preventing ants from entering your home in the first place is a proactive approach to pest management. Ensure your home is well-sealed, with no cracks or gaps that could serve as entry points for pests. Keep your kitchen and dining areas clean. Ants are attracted to food residue, so wipe down countertops, sweep floors, and clean up spills promptly. Plant natural barriers such as mint, hot peppers, and sage, or scatter coffee grounds, which repel ants but will nurture your soil. Also, keep your yard well groomed and remove dead wood and debris that can serve as a nesting site for ants and other insects.

  • Tip: Inspect your home’s exterior for potential entry points and seal them with caulk or weatherstripping.
  • Tip: Keep food sealed in airtight containers, clean up crumbs promptly, and fix any leaky faucets or pipes to deter ant infestations.
  • Tip: Keep your landscape tidy and plant native vegetation that helps deter pests.
  • Tip: Using equal parts white vinegar and water solution, spray on ant trails and entry points, which may disrupt their scent trails and deter ants from returning.

Professional Ant Control and Extermination

At Front Range Pest, we recognize that there isn’t a one-size-fits-all solution for eradicating ants. To develop the most effective plan, it’s crucial to identify the ant species, pinpoint the nest’s location, and assess the extent of the infestation. Conventional ant bait traps, particularly for restaurants and multi-unit residences, are often ineffective. Dealing with carpenter ants is a complex and time-intensive process, requiring professional pest control assistance. Depending on your specific situation, we offer guidance on non-invasive habitat adjustments, employ perimeter pesticide applications with targeted treatments and ant baits, locate and eliminate the nest, and implement structural enhancements to safeguard your home or business as needed.

Don’t let a small ant problem become a BIG ant problem. Contact Front Range Pest today!

__________

Front Range Pest is your trusted, family-owned pest and wildlife control company serving central Colorado and southern Wyoming. Our certified technicians have the expertise and credentials to ensure effective pest management for your home or business. As your all-in-one insect and wildlife specialists, we offer peace of mind by identifying wildlife entry points, removing nuisance pests, sealing access areas, performing cleanup, and making essential repairs. Schedule an inspection with us today.

Written by the digital marketing team at Creative Programs & Systems: www.cpsmi.com