Category: J & P Electrical Company - page 9

Generator Tap Boxes: Instant Power During Power Outages

Posted on December 14, 2018 by Creative Programs and Systems

No matter what business you are in, be it manufacturing, banking, health care, or education a sudden change in the power situation can be a debacle. A loss of power means a loss of time, resources, and more so it is imperative to prepare for just such an occasion.

To plan ahead to avoid an electrical interruption companies could choose to install a permanent generator. An installed permanent generator can be a large maintenance expense. To avoid this extra expense the installation of a tap generator is a viable, cost effective option. When a natural disaster like storms,blackout, and what not a tap generator allows businesses to get your electricity back up and running quickly.

A tap box is a simplistic generator that is installed outside of the business. It plays the role of connecting the business’s portable generator to the electrical system. This allows you to get a temporary supply of electricity running to avoid downtime. This connection can be made either manually or using an automatic transfer switch. The power is generated so efficiently that it can be up and running without any delay using programable logic circuits and auto start generators. Your power system will be emergency ready and the cost savings of no down time and not having to hire a professional electrical contractor to temporarily connect power will be pay off the first time the power goes out. Being prepared ahead of time pays off.

When having a generator tap box installed you will want to assess your electrical needs. The needs and requirements that your specific business have will vary from even your competition. Here are some things to consider when choosing a generator tab box.

How often do you lose power?
What are your electrical needs?
What systems are crucial to keep running?
What is your budget?

No matter what the answers are to these questions, J & P Electrical will have a solution that fits your exact needs.

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers. More information can be found at https://www.jpelectricalcompany.com

J & P Electrical Company

bus ducts, bus plugs, circuit breakers, disconnects, fuses, panel switches, product reconditioning specialists, refurbished industrial electrical components, tap boxes, transformers

Choosing Circuit Breakers Over Fuses

Posted on November 28, 2018 by Creative Programs and Systems

In the past fuses were the only option when it came to protecting homes, businesses, and equipment against overloaded circuits, shorts in circuits, and other faults. With advancements in technology, circuit breakers became a popular option over the use of fuses due to the number of advantages they are able to offer. The use of modern-day circuit breakers creates increased safety and reliability, decreased costs, and additional support for energy management initiatives.

Benefits of Using Circuit Breakers

Performance Reliability

The performance of fuses can decrease overtime. Age increases the instances of fault, causing fuses to open even under normal conditions. There is no way for fuses to be tested thus the current value that causes it to become faulty can never be determined. Circuit breakers however are tested when manufactured and can be tested throughout its lifetime to ensure peak performance.

Comprehensive Protection

Circuit breakers trip circuit, breaking the electrical connection, up to a thousand times faster than fuses. The trip capacity of a circuit breaker is greater than the equivalent fuses. Modern day circuit breakers provide exception fault current limitations which was once only known to occur with fuses. This function offers reliable protection while increasing the life of equipment by decreasing the aging that occurs with frequently tripped circuits. Unlike fuses that can experience an overload even when one of multiple fuses opens, this will never occur within a circuit breaker. When one breaker experiences an overload, the connection will be stopped immediately.

Increased Safety and Production

Replacing fuses can be risky for untrained personnel. Fuses have exposed conductors and therefore can be quite tricky to change out. The connections for circuit breakers are hidden, being that it is unexposed it keeps re-connecting the circuit safer for employees. A major cause of fires within industrial settings occurs because of fuses that were incorrectly replaced. This could include using the wrong fuse, incorrect model and/or rating, and more. These issues are almost inconceivable when correcting a tripped connection when using a circuit breaker. The time saved is also considerable when using circuit breakers as reclosing the breaker can occur instantly which prevents production downtime.

Savings

Although the cost of a single fuse is less than the cost of a circuit breaker overall the installation and usage is less expensive. Consider that three-phrase circuits must have three fuses. Also, the cost of keeping extra fuses in stock. Overall operation costs of using fuses instead of a circuit breaker are higher.

More Functionality

Circuit breakers, unlike fuses, can offer additional functions like ground fault protection. System coordination between breakers, cascading and selectivity cannot occur when using fuses whereas circuit breakers allow for this feature. Newer technology allows for circuit breakers to use remote controls, have alarm features, offer measurement features, and communication within your network.

J & P Electrical Company

bus ducts, bus plugs, circuit breakers, disconnects, Electrical Components, fuses, panel switches, product reconditioning specialists, refurbished industrial electrical components, tap boxes, transformers

Fact or Fiction? What Do You Believe About Reconditioned Electrical Equipment?

Posted on November 9, 2018 by Creative Programs and Systems

There are several common myths surrounding the use of reconditioned electrical equipment and components. Is it really true that with the purchase of refurbished manufacturing equipment and parts can truly save companies time and money while also meeting environment goals? It is our goal in this installment to debunk several myths that surround the use of reconditioned equipment and parts in the work place.

It is important to note that business decisions should always be based on facts instead of myths. Many times, myths are just handed down stories and experiences of one user that have been embellished upon throughout the years. In order to successfully navigate and grow your company it is crucial for companies to make decisions based on facts. When it comes to being competitive the goal is to find a solution that meets your needs. Purchasing high quality electrical equipment and components at a reasonable price with little to no down time should be of the highest priority.

Myth #1: Original Equipment Manufacturers Are the Only Ones That Can Properly Recondition Electrical Parts and Equipment

The biggest difference between public reconditioning companies and private OEM recondition services is the inspection process they must go through to be available for resale. This is why it is important that you only buy from reputable product reconditioning companies like J and P Electrical Company.

At J and P, you can rest knowing that we only sell the highest quality reconditioned electrical distribution equipment available. The standards set forth by the experts at J and P are in fact more stringent than any set-in place by OEM manufacturers. We disassemble each part, cleaning and inspecting each one, replacing parts that need to be replaced as we go along. They are then painted with high quality paints and acrylic enamel for durability. Equipment is reassembled and tested until it exceeds manufacturers UL certification standards.

Myth #2: Liability Concerns are Increased with the Use of Reconditioned Electrical Equipment and Parts

When you are purchasing a part does it make you feel better to know it is fresh off the line or that it has been rigorously tested over and over again to ensure its safety? When you purchase reconditioned parts and equipment from a company like J and P you can rest assured knowing it has been tested two times over, before and after reconditioning, each and every time. There is less liability involved in products and equipment that have gone through arduous testing.

J & P Electrical Company

Electrical Product Reconditioning, Refurbished Electrical Components

Managing Spare Parts in Manufacturing Settings

Posted on October 19, 2018 by Creative Programs and Systems

When it comes to maintaining an inventory of spare parts on hand many companies are reluctant. There are quite a few in management that wonder if it is counter intuitive while trying to control operating costs. The goal of all businesses, not just manufacturing, is to reduce expenses while increasing efficiency and many don’t see how keeping spare electrical components on hand helps achieve this goal. In this installment we will look into how having an inventory of parts on hand eliminates downtime and increases overall effectiveness without extra expense to the company.

Inventory Management

By incorporating spare part management into plant operations managers can successfully create an environment where downtime, caused by machine failure, is practically eliminated. The biggest struggle in spare part management is creating an inventory. In order to do this effectively, it is crucial that the maintenance records of machinery are thoroughly gone over, and critical part breakdowns are identified. Once this has been completed there you will be left with an idea of what spare parts are needed to comprise a complete operational spare part inventory.

Don’t forget when creating an inventory list to check into refurbished parts and components. Many older pieces of equipment have become obsolete however this doesn’t mean that you can’t find parts to repair them. Many times, obsolete equipment can be repaired using parts that can be found through companies specializing in obsolete refurbished electrical components, such as J & P Electrical Company, https://www.jpelectricalcompany.com.

Strategy of Operations

Determining whether you will function as a predictive or reactive position plays a large role in the replacement part stock that you will keep on hand. Most manufacturers are historically known for being reactive to events like equipment failure. In order to successfully create a functional spare part inventory, facilities must turn their focus on a more predictive approach to machine maintenance and failure. Successful predictive spare part management will include the collection and analysis of data, the ability for managers to see the operation as hole in which they foresee underlying problems and find solutions.

Inventory Control

Don’t think that your spare part inventory has to be all-encompassing to be effective. In reality that is an unrealistic goal to achieve. Instead develop an inventory that is categorized by priority. Recognize parts that can be used for more than one purpose, those that are critical to your operation, and those critical to a specific piece of machinery. This needs to be revaluated on a regular basis to make sure that as new machinery is introduced they aren’t forgotten.

J & P Electrical Company

Electrical Surplus Asset Management, Electrical Surplus Demolition, Electrical Surplus Recovery, Manufacturing Plant Clean Out

What to Avoid When Purchasing Refurbished Electrical Components

Posted on October 4, 2018 by Creative Programs and Systems

Buying refurbished electrical components such as circuit breakers, transformers, bus ducts and plugs is just one way that industrial manufacturers can save a great deal of money. The one aspect that needs to be seriously considered is where companies purchase refurbished electrical components. Buying from reputable refurbished manufacturers is a must when it comes to electrical components that will be used in any settings, especially the manufacturing industry. Some companies, often less reputable offer deep discounts. It is crucial to ensure that the savings don’t equate to an increased safety risk.

When purchasing refurbished electrical components, especially from online companies like ebay take note to thoroughly check over equipment for damage, rust, missing pieces, or improper labeling. When buying online it is important to know exactly what you are looking for before you make a purchase. This can help to ensure that you are sure to get exactly what you need. Once you have developed a relationship with an online supplier through ebay or another online source you will have more confidence in purchasing through them in the future.

What to Avoid When Purchasing Refurbished Electrical Components

Be sure you know what you are looking to purchase. Purchasing electrical components is different than a lot of other purchases in that you should do some research to really know what you need and are looking for before you even begin researching places to purchase it. Understand the different brands available and the part number that you are looking for.
Advertising and ads are meant to draw people in. Don’t get taken by an ad that doesn’t offer specifics on products that you are interested in purchasing. You should know in detail what you are purchasing and the exact condition it is in. Understanding the difference between new, used, and refurbished electrical components helps to make sure you are getting exactly what you expect.
If the information you need is not clearly listed on the products label it is important to ask questions about the product and get all answers in writing. This clear communication between seller and buyer will help prevent confusion and later disputes.
Never buy from a company that doesn’t have a solid track record. Before purchasing any electrical parts and components, new or used, do research on the company offering it for sale. Does the company have reviews and testimonials? How long have has the company been in business? What is their return policy? Seek out their policies; find out if there is a restocking fee if a return needs to be done, if they offer returns, or if it is exchange only.

Questions to Ask When Buying Refurbished Parts and Components

Am I purchasing a new, used, or refurbished part?
If refurbished, what is the process, in detail, that the part goes through before it can be sold?
What are the company’s product guarantees and warranties?
Am I buying a piece that is in proper working order or is it being sold as is, for parts only?
What is the testing process your refurbished parts go through before they are sold?

Purchasing refurbished parts and components makes solid business sense especially in an economy where we are trying to stretch our already tight budgets. It is important to have properly working and maintained equipment when working in any industrial manufacturing setting. One was to ensure this occurs is to purchase your refurbished electrical components and parts from companies with a solid reputation, like J & P Electrical Company.

J & P Electrical Company

Electrical Product Reconditioning, Refurbished Electrical Components

The Basics in Wiring Electrical Disconnect Switches

Posted on September 7, 2018 by Creative Programs and Systems

Understanding how the electrical system works in your manufacturing facility is not as difficult as you may think. While it may seem like magic how the lights turn on or how the power gets to your stuff that you plug into the wall outlet. However, it is far from magical and in fact it is quite simple really. It is not a very complex system when explained.

There are several parts that make up your electrical service, one of the most important parts being the disconnect switch. This device is designed to instantly shut off the power to your facilities main power panel. This device is a very important part of your manufacturing electrical system and should only be used in extreme conditions.

How does an electrical disconnect switch work?

The basic operation of an electrical disconnect switch is simple in that it truly has only one purpose and that is to kill the power to the main power panel for your facility. All the facilities wiring goes into the main power panel and is connected to breakers that control the power inside the building. The disconnect switch sits in line between your facilities electrical meter and main power panel.

By turning this switch off you will instantly disconnect all power going into your location, this does not however, have any effect on your electrical service. You will continue to have power at the meter and on the feeder side of disconnect switch. It is important to know where your electrical disconnect switch is, which is also referred to as the electrical service disconnect switch.

When repairs or replacement is needed it is important to find the right parts.

Due to the seriousness of the functionality of the electrical disconnect switch only trained professionals should ever open up the disconnect switch box. This is because the feeder lines going into the switch have 240v running through them and that is enough to kill a person if you are in direct contact with it. When repairs are needed, and it becomes necessary to replace the electrical disconnect switch there are several options that will be recommended. One of the more common options in manufacturing is budget friendly reconditioned disconnect options.

When parts are needed you can insist on using reconditioned equipment. Often reconditioned electrical components like the disconnect are preferred as they not only save you money but most often all the bugs that are found in new OEM parts have been worked out and fixed.

J & P Electrical Company

How Reconditioned Electrical Components Can Save Manufactures Money

Posted on August 23, 2018 by Creative Programs and Systems

If you are a manufacturer of products you know how essential it is for you to keep those operating costs down to make as much profit as possible and to see your business thrive. One way of reducing your overhead is by purchasing those raw materials at the least expensive rates possible.

Another way of reducing those operational costs is by replacing those worn out electrical parts needed in your manufacturing equipment with quality reconditioned electrical distribution equipment and reconditioned electrical parts. Keep in mind that not all parts that need to be reconditioned have functional problems to begin with, the parts may simply have been leased and when the lease has expired the part may be returned and need to be reconditioned before being issued for sale. Reconditioned electrical parts are of similar quality as new parts, but simply cost a lot less.

As surprising as it may be, purchasing high quality reconditioned electrical parts can save your manufacturing company anywhere from 50% to 75% over purchasing new parts and when quality reconditioned electrical equipment is reconditioned properly they can last if those new parts as well.

Choosing the Right Reconditioning Company

Of course you don’t want to purchase reconditioned electrical distribution equipment from just any company that reconditions these types of parts you want to buy those reconditioned electrical parts from a company that has an excellent record for those parts they sell and you want to make sure that the company has excellent reviews from places such as the Better Business Bureau and Google as well as testimonials on the company’s website.

When purchasing reconditioned electrical parts even from a reputable company here are some things you want to know about the reconditioning process before purchasing those parts.

Here are a few of the questions you want to ask.

1) What type of electrical parts does the company recondition? Does it recondition and sell the types of parts your manufacturing company needs?

2) Does the reconditioning Company completely disassemble the use part and clean all the parts and examine them to ensure that each of the smaller individual parts are in good condition?

3) Is the reconditioned used part then repainted with quality paint to give it that new like look and help to protect the part?

4) Is the reconditioned part tested once it is put back together and does the reconditioned part meet or exceed the Manufacturers UL certification.

5) Does the reconditioned part come with some type of warranty, so you can be assured that the money spent on the used part won’t be wasted?

By purchasing high quality reconditioned electrical components manufactures can save significant amounts of money when replacing those old worn out electrical parts for you manufacturing machinery. If your company is looking to cut operating costs, then buying reconditioned electrical parts for a reputable company may be one way do so.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com. To contact one of our product reconditioning specialists, call 877.844.5514 today.

J & P Electrical Company

Understanding Your Business’s Breaker Panel

Posted on August 10, 2018 by Creative Programs and Systems

Technology has been growing faster and faster in recent years, and your business seems to need to use it all to keep up with your competition. All those computers and other technological devices that are helping your business grow are taking up more power and space in your business’s breaker panel, which can lead to trouble after a while.

That means that your breaker panel eventually may not be large enough to handle everything and you may find that your company will go in the dark every so often. There are a few signs that you should look out for to see if it is time to replace your business’s breaker panel. One of the most noticeable things that you will see are flickering lights. While you may think that your light bulbs just need to be changed, the fact is that you may need a new breaker panel installed instead.

Another sign may be that your panel switches keep tripping and shutting things down. This may not be a big deal the first time that it happens, but after a while, it can affect the productivity of your work. You should also be able to read what each panel switch is connected to, and if you can’t then it can be difficult to know which panel switches to flip when you need to cut the power to something in your office.

Strange buzzing noises or popping sounds are never a good sign either, and anything like that can quickly cause an electrical fire to start. You may want to try to ignore many of these signs, in hopes that you can just get by to save money, but we recommend getting these things fixed immediately.

Here at we offer for sale an abundance of reconditioned electrical surplus options. All our reconditioned breaker panels meet the strictest safety requirements, and if it weren’t for the lower cost, you would have no idea that these units were reconditioned when you look at them.

We can find a new breaker panel that will fit your current and future needs in our reconditioned electrical surplus and install it quickly, so that your business does not experience too much downtime. Since these breaker panels are ready to go, all we need to do is hook them up and attach everything before turning them on. This is much cheaper than rewiring and the many other options that some other electrical companies offer.

We know that your time is valuable to your business, and we have found that using reconditioned electrical surplus items can save you that time as well as a lot of money.

J & P Electrical Company

Electrical Product Reconditioning, Product Reconditioning, Refurbished Electrical Components

How Are Bus Plugs and Ducts Used in Manufacturing?

Posted on July 19, 2018 by Creative Programs and Systems

All buildings whether commercial or residential require some sort of electrical power in order to provide lighting, outlets and other electrical devices. For commercial buildings, you have power needs for machinery, lighting, cooling systems, and other types of electrical needs. Typically, in a residential building, you have electrical service entering the house with cables. This is different then how electrical power is distributed in commercial and manufacturing settings.

Commercial buildings, especially those used by medium or large-scale manufacturing businesses use a larger type power distribution system that requires a much different way to run power through the manufacturing spaces of the building. Unlike residential power distribution which uses cables to carry the power throughout the home, commercial building use bus ducts or sheet metal runs with either aluminum or copper busbars.

History of the Busway Power Distribution System

The busway and bus bars were first introduced in the US back in the 1920’s at the request of the auto industry in Detroit, Michigan. The system gave them the necessary versatility that was needed for supplying power to the assembly line equipment that was being used in the manufacturing facilities at the time. Over the years since, there have been numerous innovations that have improved on the original design and installation procedures.

Commercial Power Distribution System Components

Heavy duty machinery typically found in manufacturing plants have unique power requirements which cannot be served by typical power distribution systems that are found in most residential homes and most commercial buildings. For these unique power requirements, there is a power system that is designed especially suited for this type of need. Bus Ducts and Bus Plugs are combined to deliver the necessary power to each machine

Bus Ducts – Bus Ducts also referred to as busways are sections of sheet metal with bars attached to them that are made of either aluminum or copper. The sections are connected together in order to reach each piece of machinery that is needing the power. This type of power distribution system requires trained, certified professional electricians to install them and ensure that they are in full operation at all times.

Bus Plugs – Bus Plugs are specially designed components that work in tandem with the busbars in a unique type of power distribution system that is typically installed in a large-scale manufacturing facility. Each bus plug is used to connect directly to busways that are running throughout building to deliver the power to equipment like large motor starters and other power switching equipment.

Indoors and Outdoors Power System

One of the benefits of using this type of system in a manufacturing facility is that it can be used both indoors and outdoors to deliver the necessary power to different parts of any operation. The unique design of the system helps to prevent voltage drops across each of the numerous sections of the bus ducting throughout the building.

The system can also be fitted with a trolley system that is designed to deliver power to equipment that is designed to move frequently. There are also cables that are used to deliver the power directly to the trolley itself.

J & P Electrical Company

Fused Disconnect Switch vs Circuit Breakers

Posted on July 6, 2018 by Creative Programs and Systems

For all those people who are looking for major differences between fused disconnect switches and circuit breakers, this post will eradicate all your confusions and help you to make the best choice. Before proceeding further, let’s shed some light on why you need devices such as circuit breaker panels and fused disconnect switches.

Electrical circuits in residential and commercial establishments are designed to carry a certain amount of current. Due to any reason, if more current passes through them, it can lead to dire circumstances where sensitive appliances and equipment can be destroyed. In some situations, this overflow of current through electrical circuits can also result in a fire that can prove to be extremely fatal for the inmates of the building.

In order to prevent such a situation from happening, different devises such are used that serve the purpose of protecting overcurrent in wires. These devices, in a current overflow situation, disconnect or open the circuit. This helps in preventing the fire from erupting. Thus, there are fewer chances of any damage to be caused to appliances and equipment installed in the building. Devices such as circuit breaker and fused disconnect switch also work in case of short-circuit situations.

Now that you are aware of the basic function of both these devices; let’s now have a look at major differences between them.

Fused Disconnect Switch

A fused disconnect switch, as the name suggests, is a combination of a fuse and switch. The fuse shuts the circuit off and switch disconnects it in case of an issue. Switches are designed to be shut the power off manually. On the other hand, fuse works in the opposite way. They are made up of a small filament that melt down in case of a current overflow. A fuse’s current rating is preset. Thus, when the current exceeds the rating of the fuse for a longer period of time it melts automatically. As a result, the circuit is disconnected.

A point to note here is that when a fuse disconnects the circuit, it can be used again. Power can only be restored if the fuse is replaced by a new one.

Circuit Breaker

With circuit breaker, there is no issue of getting a new fuse every time it turns the power off due to the overflow of current or short-circuit. Thus, it is often considered a better option for many appliances. Circuit breaker panels can also be turned off in a manual way as they also serve the functions of a switch. This feature makes them handy if you want to do get some electrical work done in the building.

A circuit breaker disconnects the circuit automatically with the help of an electromagnet it features when it detects overflow of current or a short-circuit. After the problems have been fixed, it only needs to be turned back on for restoring power.

A Final Word

To sum it up, both these devices can help a great deal to eliminate issues caused by the overflow of current or short-circuit. As stated above, a circuit breaker disconnects the circuit both automatically and manually and a fused disconnect switch offers the same purpose. The difference lies in their design and functionality. Thus, when selecting them, take into consideration the electrical requirements of your premises for taking the best decision.

J & P Electrical Company